toggle menu
CONTACT US

RF-500C

(Cross Table)

Heavy Duty Geard Head Floor Type Milling Drilling Machine
Heavy Duty Geared Head Spindle Power Down Feed 0.1 – 0.2 – 0.3 – 0.4mm per/rev

  • Heavy duty geared head drilling machine, 50mm drill capacity with 200mm of spindle tarvel, 50rpm low speed for heavy drilling.
  • Cross work table tilts to +/-90º and rotates 360º(RF-500C), coolant base system.
  • Forward and reverse spindle switch with high and low speeds.
  • Optional: Tapping Switch.

Specification

Item Unit RF-500C
Main Motor HP 4 (3-Phase)
Speed rpm 60Hz 60~1810, 50Hz 50~1510
(6 speeds)
Taper   MT4
Stroke mm 200
Depth mm 340
Table Size mm 820 x 240
X Travel mm 460
Y Travel mm 280
Column Diameter mm Ø180
No. of T Slot   4
T Slot Size mm 16 x 26
Coolant Pump   1 / 8HP
Packing Dimensions mm
(L x W x H)
1130 x 1120 x 2210
Machine Weight NW/GW 750 / 800 kgs
1650 / 1760 lbs
20'/40' Loaded Unitscontainer 20' 10/20 Units
WORKING CAPACITY
In Mild Steel Drilling 50mm (2")
Face Mill 100mm (4")
End Mill 25mm (1")
In Light Alloy Drilling 50mm (2")

Optional

Halogen light

Coolant System

Chuck Guard For Mill Drill

3" U Type Angle Vise

Drill Chuck and Key

Face Milling Cutter

Close

Halogen light

Description

The halogen light can illuminate the working enviroment with better sight.

Close

Coolant System

Description

Good for drill presses, Mill/drill , Bandsaw, Milling machine)

Close

Chuck Guard For Mill Drill

Description

The guard can protect operator from flying chips during working.

Close

3" U Type Angle Vise

Description

This angle vise can clamp the workpiece with preferred angles and very easy to use.

Close

Drill Chuck and Key

Description

Available with different inch/metric size for your selection.

Close

Face Milling Cutter

Description

Available with different inch/metric size for your selection.