toggle menu
CONTACT US

RF-40N2F

(Spindle Power Down Feed 0.12 – 0.18 – 0.25mm per/rev)

Gear Head Bench Type Milling Drilling Machine

  • Geared head Milling/Drilling Machine.
  • Rapid spindle speed changes thru quick-select gear shift levers.
  • Fast feed spindle/quill handles and a fine feed handwheel dial for wide range control.
  • Tilting head 90° left and right 30°.
  • Optional deluxe stand.
  • Optional tapping switch.
  • Optional coolant system, table power feed.
  • Optional work light.

Specification

Item Unit RF-40N2F
Main Motor HP 1 (3-Phase) / 1.5 (1-Phase)
Speed 1 Speed Motor
(standard)
rpm 60Hz 65~1550, 50Hz 55~1260
(6 speeds)
2 Speed Motor
(optional)
rpm 60Hz 65~3100, 50Hz 55~2520
(12 speeds)
Taper   MT3 or R8
Stroke mm 107
Depth mm 260
Table Size mm 730 x 210
X Travel mm 460
Y Travel mm 230
Column Diameter mm Ø115
No. of T Slot   4
T Slot Size mm 16 x 26
Packing Dimensions(w/o stand) mm
(L x W x H)
810 x 740 x 1150
Machine Weight(w/o stand) NW/GW 270 / 300 kgs
595 / 660 lbs
20'/40' Loaded Units   40/80 Units
WORKING CAPACITY
In Mild Steel  Drilling 40mm (1.5")
Face Mill 100mm (4")
End Mill 20mm (0.75")
Tapping (Optional) 20mm (0.75")
In Light Alloy Drilling 40mm (1.5")

Optional

Halogen light

Deluxe Stand

Coolant System

Chuck Guard For Mill Drill

3" U Type Angle Vise

Drill Chuck and Key

Tapping Control

Face Milling Cutter

Power Table Feed

Digital Readout

Close

Halogen light

Description

The halogen light can illuminate the working enviroment with better sight.

Close

Deluxe Stand

Description

FOR RF-25, RF-31, RF-40, RF-45 SERIES

Close

Coolant System

Description

Good for drill presses, Mill/drill , Bandsaw, Milling machine)

Close

Chuck Guard For Mill Drill

Description

The guard can protect operator from flying chips during working.

Close

3" U Type Angle Vise

Description

This angle vise can clamp the workpiece with preferred angles and very easy to use.

Close

Drill Chuck and Key

Description

Available with different inch/metric size for your selection.

Close

Tapping Control

Description

Tapping function for more operation convenience.

Close

Face Milling Cutter

Description

Available with different inch/metric size for your selection.

Close

Power Table Feed

Description

It can be installed on mill/drill machine for conveniently feeding the workpiece.

Close

Digital Readout

Description

East to read the figure form the control panel